Best Sign Systems, captive message signs

Captive sliders quickly show room status. Available in Graphic Blast® raised 1/32” MP Plastic for signs with lettering and Braille. Factory-bonded construction features a captive slider to prevent loss or theft. Custom sizes and styles available.

A) M62
6” X 2 1/4” x 1/8” (152mm x 5mm7 x 3mm)
MP Plastic

B) M134
13” x 4” x 1/8” (330mm x 102mm x 3mm)
MP Plastic

C) 900031
8” x 6” x 1/4” (203mm x 152mm x 6mm)

MP Plastic

Click here for specifications

SAMPLE SPECIFICATION SHEET, SECTION 10426, SIGNAGE AND GRAPHICS

PART 1 - GENERAL

1.01 SUMMARY

A. This section includes the following:
Captive Message signs.
Products supplied in this section are to be installed by others.

1.02 SUBMITTALS

A. Manufacturer's Data: Submit manufacturer's descriptive literature and specifications, including color samples of material for selection, as applicable for approval.

B. Submit shop drawings listing sign styles, lettering and locations, and overall dimensions of each sign.

C. Submit full size sample sign of type, style and color specified including method of attachment.

D. Manufacturers must submit 3 references showing comparable products for projects completed within the last 5 years.

E. Submit manufacturer's standard warranty information.

PART 2 - PRODUCTS

2.01 MANUFACTURER

A. Best Sign Systems Inc., 1202 N. Park Ave., Montrose, CO 81401;

Telephone 1-800-235-BEST (2378); Fax 1-970-249-0223; email sales@bestsigns.com.

2.02 MANUFACTURED UNITS

A. Wood/Wood captive message signs shall be 12" x 6" with [specify wood type] frame, slider and back. Copy engraved and paint filled one standard color. [Specify lettering style, upper case or upper and lower case, and letter and number height.]

B. Wood/Brass captive message signs shall be 11-1/2" x 4-1/2" with [specify wood type] frame and satin brass slider and back. Copy engraved and paint filled one standard color. [Specify lettering style, upper case or upper and lower case, and letter and number height.]

C. Wood/ES Plastic captive message signs shall be 11-1/2" x 4-1/2" with [specify wood type] frame and ES Plastic slider and back. Copy engraved to core. [Specify lettering style, upper case or upper and lower case, and letter and number height.]

D. M134 captive message signs shall be 13" x 4" with ES Plastic frame, slider and back. Copy engraved to core. [Specify lettering style, upper case or upper and lower case, and letter and number height.]

E. M62 captive message signs shall be 6" x 2-1/4" with ES Plastic frame, slider and back. Copy engraved to core. [Specify lettering style, upper case or upper and lower case, and letter and number height.]

F. M94RB captive message signs shall be 9-1/2" x 4-3/4" with MP Plastic frame, slider and back. Copy and Grade 2 Braille raised 1/32". Core of slider painted a contrasting color. [Specify lettering style, upper case or upper and lower case, letter and number height, and placement location of Grade 2 Braille.]

PART 3 - EXECUTION

3.01 INSTALLATION

A. General: Locate sign units and accessories where indicated, using mounting methods of the type described and in compliance with the manufacturer's instructions.
Install signs level, plumb, and at heights indicated.

B. Mount using methods indicated below [specify method below].
Vinyl foam tape.
Holes and screws.

Site by Dayzign Graphics